Click Get Details to get more information on a specific product.
You can add the item to your cart or basket from the Details page.
|
|
 |
Kit includes drill bit, tap and plug. For use when deleting your balance shaft, you must tap and plug the oil feed hole.
|
|
|
 |
Brass freeze Plug for all 2.2/2.5 blocks.
|
|
|
 |
Clevite 77 Tri-metal main bearing set for 2.2/2.5 motors. (.25mm or .010" oversize)
|
|
|
|
Clevite 77 Tri-metal main bearing set for 2.2/2.5 motors. (.50mm or .020" oversize)
|
|
|
|
Clevite 77 Tri-metal main bearing set for 2.2/2.5 motors. STD size
|
|
|
 |
Clevite 77 tri-metal rod bearings for 2.2/2.5 motors. .25mm (.010") size, set of 4 rod bearings.
|
|
|
|
Clevite 77 tri-metal rod bearings for 2.2/2.5 motors, .50mm (.020") oversize, set of 4 rod bearings.
|
|
|
|
Clevite 77 tri-metal rod bearings for 2.2/2.5 motors. STD size, set of 4 rod bearings.
|
|
|
 |
|
|
|
|
Custom made to FWD Performance specifications and built from rugged 4340 billet steel, the BC Pro Billet rods for the 2.2/2.5 are designed for high horsepower forced induction engines utilizing the new ARP2000 bolt, rated to 220,000 p.s.i. this rod is rated in excess of 200HP per cylinder We will open up the small end to .901 wrist pin
uses the 2.2/2.5 bearings, 5.945" length, weight =596 grams per rod.
|
|
|
|
Custom made to FWD Performance specifications and built from rugged 4340 billet steel, the BC Pro Billet rods for the 2.2/2.5 are designed for high horsepower forced induction engines utilizing the new ARP2000 bolt, rated to 220,000 p.s.i. this rod is rated in excess of 200HP per cylinder We will open up the small end to .901 wrist pin
uses the 2.2/2.5 bearings, 5.945" length, weight =596 grams per rod.
|
|
|
 |
Used T-2 rods that have been checked and cleaned. Shot peened for added strength, tops drilled for better oiling, and ARP rod bolts added. Price is for a set of 4
We also set-up the small end with new bushings set up for our custom Venolia pistons with larger wrist pins or for the stock pin size. Currently only .912 and .927 pin available. No stock .901 pin size in stock
|
|
|
 |
Remaned intemediate oil shaft for all 2.2/2.5 motors, including T-3.
|
|
|
 |
Intermediate shaft bushings.
|
|
|
 |
Melling (high quality manufacturer of OEM and aftermarket oil pumps) high volume oil pump for all 2.2/2.5 applications.
|
|
|
 |
Thick, .040-.042 composition material head gasket that can be used for replacement or competition applications up to 12.5:1 compression ratio. 2.2/2.5 Turbo 2 and crossdrilled
|
|
|
 |
Sealed Power piston rings from Federal-Mogul in .020/.50mm size for 2.2/2.5 motors (1.5mm x 1.5mm x 4mm)
|
|
|
|
Sealed Power piston rings from Federal-Mogul in .030"/.75mm size for 2.2/2.5 motors (1.5mm x 1.5mm x 4mm)
|
|
|
|
Sealed Power piston rings from Federal-Mogul in .040"/1.00mm size for 2.2/2.5 motors (1.5mm x 1.5mm x 4mm)
|
|
|
|
Sealed Power piston rings from Federal-Mogul in STD size for 2.2/2.5 motors (1.5mm x 1.5mm x 4mm)
|
|
|
 |
Single piston ring set. Only need enough for one cylinder, not all 4. Once you order, please follow up with the size and application you need. The only available sizes are std, .020, .030, and .040.
|
|
|
 |
A must have when boring/honing your block in preparation of an engine rebuild. Price is for a 30 day rental.
|
|
|
